DeWalt TDKIT12X5 XR 18V 12 Piece Power Tool Kit with 5x 4.0Ah Batteries

DeWalt TDKIT12x5 XR 18V 12 Piece Power Tool Kit with 5x 4.0Ah Batteries

The DeWalt TDKIT12x5 is a 12 Piece XR 18V Kit including DCN692N Brushless Framing Nailer, DCN660N-xJ Brushless 2nd Fix Nailer, DCD795N Combi Drill, DCG405N Grinder, DCF887 Impact Driver, DCS380N Reciprocating Saw, DCS355 Multi Tool, DCS331N Jigsaw, DCS391N Circular Saw, DCH253 SDS, DCP580N Planer, DWV9390 Planer Bag, 5 x 4.0Ah Batteries, DCB115 Charger, 3 x Tough System Boxes, 1 x Large Duffel Heavy Duty Tool Bag and DCL040 Torch.

Offering up to 57% more runtime than standard brushed motors, the DEWALT 18V MAX* XR family of tools features brushless motors. While mechanical carbon brush motors generate friction and heat build-up resulting in lost energy & less runtime, XR brushless motors run cooler and more efficiently enabling longer runtime between charges.

Features & Specification: 

DCN692N Brushless Framing Nailer

• Dry fire lockout ensures that the tool is protected from firing without nails in the magazine
• Cordless design so no hanging leads to deal with
• User can engage contact trip lock-off and prevent accidental dis-charge of fastener
• Two speeds or power levels which optimises the nailer for firing all lengths of nails.
• The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed
• Mechanical rather than gas operation offers consistent performance at temperature between -20 and 50 degrees celsius and minimal cleaning/service requirements
• Class leading vibration and sound figures, offer fantastic user protection
• Versatile 30 – 34 degree magazine angle will accept most clipped head, and off centre round head paper tape or wire weld collated framing nails
• Reversible belt/rafter hook provides increased portability and versatility on the job-site
• Depths can be easily adjusted using the thumb wheel depth adjuster Increased visibility and durability along with protection for work-surface from the non-mar contact-trip
• Ergonomic tool design allows the nailer to fit easily between a 400mm centre stud
• Gas free operation offers a significant saving in running costs
• Tool free stall/jam clearance minimises user down time

DCN660N-XJ Brushless 2nd Fix Nailer

• The new generation of cordless power tool technology means that cordless Lithium-ion battery technology is now able to deliver performance that matches AC (mains) powers or air tools (with a compressor).  This model doesn’t therefore require any gas, so no mess, no smell and no additional purchases, just plug in your battery and away you go.
• As its part of the XR range from DeWalt the DCN660 is compatible with all of DeWalt’s 18v Li-ion batteries, from 2.0Ah to 5.0Ah.
• With its quick readiness and bump feed function this model can fire up to 4 nails every second and has the ability to fire nails up to 63mm in soft wood or 50mm in hard wood.
• It’s designed to avoid any stalls or jams, but if one were to happen there is 2 easy ways to clear them in seconds.. both without the need for additional tools.

DCD795N Combi Drill

• Brushless Motor Technology for excellent efficiency
• Ultra compact, lightweight design allows use in confined spaces
• Two speed all metal transmission for increased runtime and longer tool life
• Drill Driver and Hammer feature for multiple applications
• 15 position adjustable torque control for consistent screw driving into a variety of materials
• Intelligent trigger design allows for total control of application
• Foot LED with delay feature for improved visibility and flashlight functionality
• Improved ergonomic design with rubber grip over mould improving users comfort
• Part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster

DCG405N Grinder

• Improved ergonomic slim body for comfort and control
• 18V Brushless Motor.
• Constant clutch and e-clutch brake Reduces the kick back reaction in the event of a pinch or stall.
• Mesh covers restricts dust being sucked through the motor.
• Rubber Overmould provides enhanced grip and comfort.
• Two Position Side Handle offers greater comfort and control.
• Battery Voltage – 18v
• Battery Chemistry – XR Li-Ion
• No Load Speed – 9000 rpm
• Max. Disc Diameter – 125mm
• Spindle Thread – M14 (22 mm)
• Weight – 2.5 kg

DCF887 Impact Driver

• Latest generation 18V XR Li-Ion Brushless Impact Driver.
• 3 Mode Impact selector improves user control.
• Improved Brushless motor provides 28% increased torque.
• 135mm Overall length.
• 3 LED ‘Halo‘ ring provides maximum illumination of work piece
• 6.35mm ‘drop and load‘ hex bit holder allows for quick, one handed fitment
• Aluminium front housing provides greater heat dispersion increasing motor life
• Ergonomic handle and rubber overmold reduces vibration and user fatigue

DCS380N Reciprocating Saw

• High performance reciprocating mechanism and lightweight magnesium gearcase offer the user optimised power to weight ratio
• Intelligent variable speed trigger, lock-off switch and electronic motor brake for quick controlled cuts and enhanced work safety
• Lever-action keyless blade clamp for quick and easy blade changes
• Pivoting adjustable shoe with open top for high stability and blade visibility during a cut
• Four-position blade clamp allows for flush cutting and increased versatility
• Modular component design for trouble free servicing
• Rubber coated grip to reduce surface vibration and user fatigue
• Improved ergonomic design

DCS355 Multi Tool

• DeWalt® brushless motor delivers up to 57% more run time over brushed
• Quick-Change™ accessory system allows blades and attachments to be changed quickly without wrenches
• Dual-Grip™ variable speed trigger gives users ultimate speed and application control
• Bright LED light illuminates dark work surfaces for accurate cutting
• DeWalt Oscillating Tool Guide System allows users to set the depth or height for accurate repeatability

DCS331N Jigsaw

• Part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster
• Powerful & Highly efficient DeWalt PM47 fan-cooled motor with replaceable brushes. delivers fast cutting action up to 3000 strokes per minute maximising user productivity
• Intelligent variable speed trigger & lock-off switch for quick controlled cuts and enhanced work safety
• Tool-free adjustable shoe with anti-scratch cover bevels 45° in both directions
• Quick and easy patented keyless blade change system

DCS391N Circular Saw

• Highly efficient PM58 DeWalt fan cooled motor with replaceable brushes that are capable of delivering up to 3700rpm for very fast cutting applications using the 165mm TCT blade.
• Durable tool design on these DCS391N circular saws include cast magnesium base for repeated accurate cuts, an ergonomic handle set with a rubber overmould for increased user comfort and safer use
• Intelligent trigger action and keyless bevel angle and depth of cut adjustment with easy to read scale allow for maximum cordless versatility when using these DeWalt circular saws.
• Ultra thin kerf 165mm 24tooth carbide tipped blade allowing for efficient run time and fast, smooth cut finish allowing 55mm depth of cut

DCH253 SDS

• Ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm
• Rotation stop mode for light chiselling in plaster, tiles and render and impact stop mode for rotary only drilling in wood and metal
• Best in class vibration, 6.9m/s² reduces user fatigue and maximises operating periods
• Bright white LED with delay feature improves visibility

DCP580N Planer

• Brushless Motor – Increased power and runtime
• Lightweight – only 3.1 Kg with battery, weighted towards the front of the trigger to reduce any physical strain during use
• Soft grip handle offers end-users optimum comfort and manoeuvrability during a wide range of applications
• On board blade storage and torx key – for quick and easy blade changes
• 2.0mm Depth of Cut – For large material removal
• Fine indexed, accurate depth adjustment knob allows for maximum precision with 0.1mm increments
• Front and rear shoe milled in situ – For increased accuracy
• Part of the intelligent XR Lithium-Ion Series designed for efficiency and making applications faster
• Air lock port – compatible with DeWalt Airlock dust extraction system or DWV9390-xJ Dust Bag
• Foot lock off – stands the tool above the work surface
• Market leading 9.00mm rebate capacity making it ideal for minor on-site alterations and fixes

DWV9390 Planer Bag

• Large capacity dust collection bag
• Spring loaded for easy emptying
• Left or right mounting
• Compatible with: DCP580

What is included:

• 1 x DCN692N Brushless Framing Nailer
• 1 x DCN660N-xJ Brushless 2nd Fix Nailer
• 1 x DCD795N Combi Drill
• 1 x DCG405N Grinder
• 1 x DCF887 Impact Driver
• 1 x DCS380N Recip Saw
• 1 x DCS355 Multi Tool
• 1 x DCS331N Jigsaw
• 1 x DCS391N Circular Saw
• 1 x DCH253 SDS
• 1 x DCP580N Planer
• 1 x DWV9390 Planer Bag
• 5 x 4.0Ah Batteries
• 1 x DCB115 Charger
• 1 x DE9883 24″ Large Duffel Heavy Duty Tool Bag
• 3 x DS300 1-70-322 Toughsystem Storage Case
• 1 x DCL040 Torch